How to Make a Marimba Review

Whenever you are interested in buying a marimba, you will want to make sure that you are getting the best possible one for your needs. The quality of the instrument will depend on a variety of factors, including the type of wood it is made of, the construction techniques, the number of keys available and the overall sound quality. So you should always try to read as many reviews as possible before purchasing a marimba.

Construction from kayu malam wood

Various kinds of wood species have been used in construction of musical instruments. Species selected for this purpose are based on their acoustic capabilities. In this regard, kayu malam is a candidate. Besides being a native timber, it also possesses desirable mechanical properties.

In the spirit of experimentation, kayu malam was subjected to a number of chemical treatments. The results are consistent with previous findings. The chemical treatments were tested for their effect on flexural strength and acoustic conversion efficiency. The results showed that the addition of wood to the resin increased the flexural strength by 57 percent. The addition of a nanoclay to the resin improved the acoustic properties of the wood.

The construction of a marimba from kayu malam wood was done to see how it compared to commercially available rosewood. Unlike other woods, kayu malam had a pleasing appearance and produced the same pitch as rosewood. In order to make the most of its acoustic capabilities, it was built to mimic the quality and sound of a commercial rosewood marimba. The result was impressive and a lot of fun to play.

In the aforementioned process, sapwood portions of the tree were machined into 340 mm x 20 mm thick slabs and dried for three months. Then the wood was treated with styrene and montmorillonite nanoclay. The resulting wood polymer nanocomposite (WPNC) was then tested for its acoustic properties. The results revealed that the composite containing nanoclay achieved the highest acoustic conversion efficiency.

Keys available

Several products are available, including the Stagg 40 key desktop synthetic marimba set. The set comes with a pair of yard heads, a padded gig bag, and a natural finish wooden frame. It also has a resonating back board to boot.

While the aforementioned Stagg 40 key desktop synthetic marimba does the job, you may want to take a second look at the more expensive and higher end offerings. The THM 3.0 has some nice touches including resonators and a three octave range. However, it is not without its flaws, including a heavy build and no padded gizmos. If you’re looking for a marimba for your youngster, you’re probably better off sticking with the aforementioned options. The five octave model is a far more expensive proposition, especially for a junior high schooler.

Whether you’re looking for a practice instrument, a new addition to your classroom, or a bona fide musical instrument, you’ll find plenty of options in your price range. Among the more expensive are the top of the line models, and a less expensive, but well made alternative. You should be able to find a decent marimba on Amazon in the price range of $500 to $700. Lastly, if you’re not on a budget, check out some of the better deals at your local music store. Some of the best offers can be found at your local music store’s annual Christmas concert or concert series.

Materials used in construction

Various materials are used for the construction of marimbas. They range from local wood to synthetic fiberglass bars. All of them produce different sounds.

The basic structure of a marimba is a frame made from wooden keys. The frame is attached to the bars by a cord. The bars are cut into different lengths to form a diatonic or chromatic scale. The bars can also form a modal scale. The bars are usually made of rosewood, but they can also be made of padauk or synthetic fiberglass.

For a marimba to sound well, the wood must be chosen carefully. The most desirable type of wood is rosewood. It is a dense hardwood with a low damping factor. It is also difficult to cut. Rosewood is only found in southern Guatemala.

Resonators are the key to the rich sound of the marimba. These tubes are shaped like a U and tuned to the notes in the lower octave. They can be made from metal or fibreglass. They are often made in the “Haskelling” process, originally used for pipe organ resonators. They are then fine-tuned by rotating metal discs on the bottom.

Marimbas are available in a variety of materials, but the most common are rosewood. They have a Janka rating of 2200, three times harder than silver maple. They are expensive, but they are worth it.

Sound quality

Whether you are building your first marimba or repairing one you already own, you should know that there are a few things to consider. These include what type of wood is used, how the wood was cut, and how the resonators are made. These factors all contribute to the sound of the instrument.

The best way to determine the quality of your marimba is to make sure that it is tuned to the standard A frequency. In general, each musical instrument is tuned to one of five A’s, and it is important to ensure that all instruments are in tune.

The quality of the instrument is also impacted by the materials used for the core and the sound plates. Rosewood is considered to be the best for producing the most pleasing sound. However, this material is costly and difficult to cut, making it a less than ideal choice for a cheap instrument.

Other less expensive alternatives are synthetic fiberglass bars. These are sold under names like Kelon, and are said to produce a similar sound to rosewood.

The sound of the prototype marimba was compared to that of commercially available rosewood marimbas. The most significant difference was that the prototype was built using local wood, or Kayu malam. This was used as a way to build a marimba that was as close to a commercially available model as possible.


Keeping your marimba clean is a must. Dust can collect inside the pipes and change the volume. If your instrument is kept in a humid room, it can deteriorate the wood.

There are a variety of products available to clean the insides of the pipes. Some of these include glass cleaners and non-petroleum based cleaners. You should also use a dry cloth to wipe the wooden tone bars down.

The best way to clean the resonator pipes is to keep them free from dust and debris. You should also check them out at least once a month.

One of the most effective ways to maintain the quality of your marimba’s sound is to clean the resonator pipes. This will prevent the rusting of the wood from occurring.

It’s a good idea to check out your resonator pipe at least once a month to see if it’s in tune. If it’s not, it’s a good idea to replace it.

The best marimba maintenance practices start before the notes are struck. The simplest way to clean the resonator pipes are to use a dry cloth. You can then spray a non-petroleum based cleaner on the insides.

The best way to care for your marimba is to take the time to learn about its maintenance. The resonator pipes, keys and other components are delicate and need to be handled with care.

Xylophone vs marimba

Xylophone and marimba are two instruments that have a unique sound. These two percussion instruments are often confused. They have a similar look, but they are very different. These instruments produce lovely noises.

The main difference between a marimba and a xylophone is their size. The marimba is smaller and produces a mellower sound than the xylophone. The range of a marimba is usually three to five octaves, while the range of a xylophone is generally three to four octaves. Unlike a marimba, a xylophone can be played alone or with other percussion instruments in small ensembles.

A marimba has resonators that extend up to almost the floor. The resonators give the marimba a warm and rich sound. Xylophone resonators are short, but they still produce a sharp, distinctive tone. The resonators are not visible, but they are responsible for the quality of the sound.

Both xylophones and marimbas are idiophones, meaning they are tuned to a musical scale. The bars on each of these instruments are arranged in a scaled pattern to produce distinct tones. The bars are arranged from shortest to longest.

The bars on a marimba are longer than the bars on a xylophone. They are arranged in a pattern similar to that of the piano keys. The bars on a marimba are made from wood or steel.

The mallets on a marimba are usually covered with a soft, yarn-like coating. Occasionally, they are made from Paduk, a type of wood from Western Africa. The marimba’s resonators are long, and they produce a mellower, higher pitch than the xylophone.